| Substance | Content |
| Ethoxylated isodecyl alcohol | 900 g/l |
| Density | 1.00±0.05 g/cm³ |
- Reduction of surface tension of droplets – droplets spread over the leaf, increasing the contact area.
- Improvement in wetting and distribution of the working solution on the plant (better coverage of the leaf surface and wax layer).
- Enhancement of penetration of systemic active substances (through the cuticle) due to increased contact and/or change in permeability.
- Helps reduce the risk of wash-off by rain due to better surface coverage and faster absorption of plant protection products.
Recommended dosages (final rate should be clarified with the manufacturer of PPP):
| Category of PPP | Active substances | Recommended dosage of adjuvant and crops |
| Herbicides | Sulfonylurea derivatives and combined preparations: (tribenuron-methyl, thifensulfuron-methyl, ethametsulfuron-methyl, triflusulfuron-methyl, rimsulfuron, metsulfuron-methyl) | 150-200 ml/100 l water |
| Florasulam | 150-200 ml/100 l water | |
| Glyphosate | 100-150 ml/100 l water | |
| Dicamba / Dicamba + 2,4-D | 100-150 ml/100 l water | |
| Imazamox + Imazapyr | 100-200 ml/100 l water | |
| Halauxifen-methyl | 100-150 ml/100 l water | |
| Fluroxypyr | 100-200 ml/100 l water | |
| Fluazifop-P-butyl | 100-150 ml/100 l water | |
| Pyroxsulam | 150-200 ml/100 l water | |
| Fungicides | Azoxystrobin, pyraclostrobin, picoxystrobin, trifloxystrobin, kresoxim-methyl (strobilurins) | 50-100 ml/100 l water |
| Prothioconazole, cyproconazole, epoxiconazole, tebuconazole, propiconazole, tetraconazole (triazoles) | 50-100 ml/100 l water | |
| Boscalid, fluopyram, fluxapyroxad, isopyrazam, benzovindiflupyr, pydiflumetofen (SDHI) | 75-150 ml/100 l water | |
| Cymoxanil (anilinopyrimidines) | 50-100 ml/100 l water | |
| Insecticides |
Chlorantraniliprole, cyantraniliprole, flubendiamide (diamides) | 75-150 ml/100 l water |
| Imidacloprid, thiamethoxam, thiacloprid, clothianidin, acetamiprid (neonicotinoids) | 50-100 ml/100 l of water | |
| Lambda-cyhalothrin, alpha-cypermethrin, deltamethrin (pyrethroids) | 50-100 ml/100 l of water | |
| Desiccants |
Diquat dibromide, diquat ion | 50 ml/100 l of water |
| Ammonium glufosinate | 100-200 ml/100 l of water |
* It is important to adhere to the specified dilution rate, calculated for 100 liters. If the water rate increases, increase the rate of the preparation; if the water rate decreases, reduce the rate of the preparation accordingly. When using less than 200 liters/hectare of working solution, the rate of use of the surfactant Alcohol Turbolip is 200 ml/hectare.
Not recommended for use in combination with MSO adjuvants or products containing solvents (oil emulsions).
Instructions for preparing a tank mixture:
- Fill the sprayer tank with water to one-third of its volume.
- Add the recommended amount of plant protection products (PPP) and mix thoroughly.
- Add the required amount of alcohol adjuvant.
- Add water to the full volume of the tank, continuously mixing the working solution.
Attention: It is recommended to conduct a compatibility test before mixing with other products.
Recommended application rate:
200 – 300 l/ha
Shelf Life guarantee: 24 months from the date of manufacture at a temperature from 0°C to +30°C in undamaged packaging.
